Need help?Do you have a question about the Eden Nemesis NA650 and is the answer not in the manual?
General| Type | Bass Amplifier Head |
|---|---|
| Signal to Noise Ratio | > 100 dB |
| Power Output | 650W @ 4 Ohms |
| Inputs | 1 x Instrument, 1 x Aux |
| Outputs | 1 x XLR (DI out), 2 x 1/4" (speaker) |
| Frequency Response | 10Hz - 18kHz |
| Input Impedance | 1M Ohm |
Overview of the Nemesis NA650 amplifier, its features, and Eden's commitment to quality.
Details on input jack, gain stage, and level indicator for optimal signal input.
Explanation of compressor, gain boost, edge distortion, and enhance controls for sound shaping.
Description of mute, EQ, DI selector/level, master volume, and headphone jack functions.
Information on mains switch, power rating, cooling system, and fuse requirements.
Details on speaker outputs, NL-4 connectors, and ground lift switch for system integration.
Guidelines for mechanical, thermal, and electrical connections, and basic operating principles.
Step-by-step guide for setting up the amplifier for the first time, including voltage and controls.
Instructions on adjusting the Enhance control and EQ sections to achieve desired tone.
Explanation of clipping, frequency masking, and room acoustics effects on sound.
Guidance on selecting speaker systems and using the headphone jack as a line driver.
Advice on contact point cleaning, dust removal, and handling 'magic smoke' issues.
Information on website resources, FAQs, online forums, and the RMA process for repairs.
To Next Page