To Next PageTo Next Page
Need help?Do you have a question about the EdenPURE GEN30 Elite and is the answer not in the manual?
Basic precautions for safe operation, including warnings about hot surfaces and potential hazards.
Describes the LED display function for temperature and mode settings.
Details overheat shut-off and inlet air overheat protection for safety.
Explains the automatic shut-off feature when the unit is tipped.
Combines infrared and convection heat for efficient and comfortable room heating.
Details the air purification function using a High Efficiency Air filter.
Details the functions of the power, mode, and temperature adjustment buttons.
Instructions on how to turn the heater on using the power button.
Explains how to cycle through ECO, HIGH, LOW, and AP modes.
Instructions on how to set the desired temperature using +/- buttons.
Automatic operation adjustment based on ambient light for quiet night use.
How to display room temperature and switch between Celsius and Fahrenheit.
Remembers last operating speed after power interruption.
Instructions for inserting batteries and using the IR remote control.
Steps to set, adjust, and turn off the timer function.
Covers cleaning, care, and storage of the heater unit.
Guidance on cleaning the High Efficiency Air filter as per manufacturer's instructions.
General
