Need help?Do you have a question about the EDER MCM Series and is the answer not in the manual?
General| Input Type | Thermocouple, RTD |
|---|---|
| Output Type | Relay, SSR |
| Display | LED |
| Power Supply | 100-240VAC, 24VAC/DC |
| Operating Temperature | 0°C to 50°C |
| Communication | RS485 |
| Dimensions | 96x96mm, 48x96mm, 72x72mm |
| Series | MCM |
| Control Mode | PID Control |
Description of the multicontrol modular MCM for lossless storage of expansion volume and pressure maintenance.
Instructions for installing the multicontrol device on a horizontal and solid floor using adjustable stands.
Mounting of degassing module MAE and makeup module MCF as per assembly instructions.
Lists optional components for multicontrol modular systems with degassing.
Lists optional components for multicontrol modular systems without degassing.
Electrical wiring diagram for the multicontrol MCM series devices.
Electrical wiring diagram for optional multicontrol MCM with two mains supplies.
Electrical wiring diagram showing potential-free contacts and module connections.
Electrical wiring diagram for multicontrol MCM, focusing on sensors and pressure transmitters.
List of spare parts for the piping components of the multicontrol device.
Spare parts list for the makeup module MCF, including versions A and B.
Spare parts for the load circuit components like contactors and circuit breakers.
Spare parts list for the degassing module MAE.
Instructions for hydraulic connection between MCM and external expansion vessels EG(Z)-M.
Guidance on installing the suction pipe for proper level compensation with expansion vessels.
To Next Page