Edge DB Series - Installation and Connection Guide; Mounting and Airflow Requirements; Wiring Connection Diagrams

Battery
Battery
Battery
Mounting Guidelines
Power Connections
Low Level Input
High Level Input
Your EDGE amplier is designed with a swift installation routine in mind.
Please mount the amplier in a dry location on a solid surface.
NEVER mount the amplier upside down as this will cause the amplier to over heat and
will eventually damage the amplier.
Before xing the amplier in place please ensure that there is sufcient air ow around
the exterior of the casing, at least two inches is sufcient to allow effective cooling.
Chassis Ground
Fuse Close To Battery
Remote Turn On Wire
4
NOTE : When using high level input it is not necessary to connect the remote turn on wire.
Do not connect both high level and low level input at the same time.