Note: Whether your kegerator can reach the actual set temperature depends on the ambient
environmental conditions.
Note: Allow the refrigerator to stand in an upright position for 24 hours before turning on the
power. This will ensure that the coolant has settled.
Operation
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
kegerator?
2. Have the installation instructions been followed, including connecting the machine to
electricity? And has proper grounding been installed for the kegerator?
3. Has the machine been leveled?
4. Is the kegerator in a site where the ambient temperature is between 50º F and 95º F all
year round?
Using the Temperature Control Panel
This kegerator has a digital control panel located on the top of the inside of the cabinet.
Pressing the temperature buttons will decrease or increase the set temperature. Press the “-”
button to lower the temperature by one degree. Press the “+” to raise the temperature by one
degree. This unit has a temperature range of 32° F - 46° F.
Press the °F / °C button to change the display from °F to °C.
The unit will run automatically once plugged in. Unplug the unit to turn it off.
To Next Page
Loading...
