EasyManua.ls Logo

EdgeStar BR2000BL - User Manual

EdgeStar BR2000BL
18 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

  • R
    Rachel HortonAug 1, 2025
    Why is food in my EdgeStar Refrigerator not cold enough?
    • N
      Nancy MitchellAug 1, 2025
      If food in your EdgeStar Refrigerator compartment is not getting cold enough, ensure it has been in the compartment for at least 5-12 hours. Make sure there's enough room for airflow by moving or removing items. Check that the door closes properly and the door gasket is intact, and minimize how often you open the door. Adjust the thermostat to a colder setting and ensure the unit has adequate ventilation.
  • C
    charlesdavidAug 7, 2025
    Why is my EdgeStar Refrigerator dispensing too much foam?
    • R
      Randy GreeneAug 7, 2025
      To address excess foam when dispensing beer from your EdgeStar Refrigerator, ensure the keg hasn't been recently moved and allow it to stand for at least two hours before tapping. Verify that the CO2 pressure is set between 10 and 12 PSI. Confirm that the keg cabinet operates between the high 30s to mid 40s, and allow sufficient cooling time if the keg was exposed to a warm environment. You may also activate the pressure relief valve on the keg coupler for three seconds to release any pressure build-up.
  • T
    Travis ThomasAug 13, 2025
    What to do if no beer flows from my EdgeStar BR2000BL dispenser?
    • J
      Joseph RichardsonAug 13, 2025
      To resolve the issue of no beer flowing from your EdgeStar Refrigerator dispenser, first check if the CO2 cylinder has pressure. Make sure both the CO2 cylinder and regulator shut-off valve are open. If those aren't the cause, replace the beer keg if it's empty. Also, verify that there are no kinks or obstructions in either the air line or dispenser line, and ensure that neither are frozen. Finally, confirm all connections are secure and all seals are in place and in good condition.
  • C
    Charles MatthewsAug 19, 2025
    Why is the beer from my EdgeStar BR2000BL Refrigerator flat?
    • K
      Katherine PerryAug 19, 2025
      If you're experiencing flat draft from your EdgeStar Refrigerator, where the foamy head disappears quickly and the beer lacks its usual fresh flavor, verify that the CO2 pressure is reading between 10 and 12 PSI. Also, residue on glassware in the form of oils will quickly dissolve the formation of foam. All recommended temperatures and gauge settings are calculated for a dispensing hose five (5) feet in length.
  • A
    amycampbellAug 26, 2025
    How to stop my EdgeStar BR2000BL from freezing food?
    • J
      Jonathon McknightAug 26, 2025
      To stop food from freezing in your EdgeStar Refrigerator, ensure that food items are not touching the back wall of the refrigerator. Additionally, try turning the thermostat to a warmer setting.

Summary

Safety Precautions

Refrigerator Setup Guide

Installing Unit Casters

Electrical Grounding Safety

Essential safety guidelines for proper electrical grounding of the unit.

Beer Dispenser Setup

Beer Tower and Faucet Assembly

Detailed instructions for connecting the beer tower and faucet.

CO2 Cylinder and Regulator Connection

Keg Tapping Procedure

CO2 Regulator Pressure Setting

Regulator Adjustment Guide

Beer Dispensing Technique

Beer Temperature Management

Draft Beer Dispenser Maintenance

Refrigerator Troubleshooting

Beer Dispenser Troubleshooting

EdgeStar Product Warranty

Warranty Coverage Details

Warranty Exclusions and Limitations

Warranty Service Description

How to Obtain Warranty Service

Instructions for contacting customer support for warranty claims.

EdgeStar BR2000BL Specifications

General IconGeneral
BrandEdgeStar
ModelBR2000BL
ColorBlack
Door SwingReversible
Defrost TypeManual
Energy Star CertifiedNo
Shelves1
TypeRefrigerator
Capacity2.0 cu. ft.
Cooling SystemCompressor
Voltage115V
RefrigerantR-134a

Related product manuals