Frost is forming in the
kegerator.
The environment is humid.
If frost builds up manual
defrosting may be required.
You can try running the
kegerator on a warmer
temperature setting,
minimizing the number of
times you open the door, or
unplugging the unit to allow
the frost to melt.
The ambient temperature is
too low.
The door is being opened too
frequently.
The door will not shut
properly.
Make sure the unit is on a
level surface.
The door gasket is dirty.
The door gasket is not
installed correctly.
Make sure the door gasket is
properly installed.
The keg being used is too
large.
Oversized kegs will not fit in
this kegerator. Please check
the “Specifications” section on
the next page for proper keg
loading options.
To Next Page
Loading...
