11
3. Slide the door down and out of the upper hinge pin and gently set the door aside.
4. Unscrew the hinge pin from the upper hinge assembly.
6. Slide the door into the upper hinge pin.
7. Secure the lower hinge to the bottom of the Kegerator with the 2 screws. The pin on the lower
hinge will go into the door.
5. Screw the hinge pin into the upper hinge assembly on the opposite side.
8. Upright the Kegerator and let it sit for one (1) hour per 15 minutes spent on its back before
plugging it it.
To Next Page
Loading...
