What to do if my EdgeStar BR7000SS does not turn on?
If your EdgeStar kegerator isn't turning on, first ensure it's properly plugged into a functioning power outlet with sufficient amperage. Also, check your fuse box for blown fuses or tripped circuit breakers and replace or reset them as needed. Addressing these power-related issues should resolve the problem.
Why my EdgeStar BR7000SS will not reach the desired temperature?
If your EdgeStar kegerator isn't reaching the desired temperature, ensure it's not placed near any heat sources or in direct sunlight. Additionally, avoid opening the door too frequently or for extended periods, and make sure it's tightly closed after each use.
Why does my EdgeStar BR7000SS turn on and off frequently?
If your EdgeStar kegerator is cycling on and off frequently, several factors could be at play. Ensure the room temperature is within the recommended range for the unit. Minimize how often you open the door, and double-check that the door is fully closed and that the door gasket is sealing correctly. Running the unit at the appropriate ambient temperature and minimizing door openings will help.
How to fix an EdgeStar BR7000SS door that will not shut properly?
If the door of your EdgeStar kegerator won't shut properly, start by ensuring the unit is placed on a level surface. Also, check the door gasket to see if it's dirty and clean it if necessary. Finally, make sure the door gasket is correctly installed. These steps should help resolve the issue.
What to do if my EdgeStar Kegerators is making strange noises?
If your EdgeStar kegerator is making strange noises, first consider that certain sounds are normal. Check the “Normal Sounds” section for reference. Also, ensure the unit is level and not touching any other appliance or furniture. Make sure that the kegerator is level, and that it is not in contact with another appliance or furniture.
Why is frost forming in my EdgeStar BR7000SS Kegerators?
If frost is forming in your EdgeStar kegerator, it may be due to a humid environment. Though the unit uses an 'auto-defrost' system, under certain conditions, manual defrosting may be required. If frost builds up, you can try running the kegerator on a warmer temperature setting, minimizing the number of times you open the door, or unplugging the unit to allow the frost to melt.
What to do if the body of my EdgeStar BR7000SS Kegerators is electrified?
If the body of your EdgeStar kegerator is electrified, this indicates a grounding issue. Contact your local electrician to test your electrical grounding system to ensure it is properly grounded.
General| Brand | EdgeStar |
|---|---|
| Model | BR7000SS |
| Category | Kegerators |
| Language | English |
Safety precautions for electrical connections and usage of the kegerator.
General safety guidelines for operating and installing the kegerator.
Details the voltage, frequency, and grounding needs for proper electrical connection.
Explains the proper grounding procedure for electrical safety.
Instructions on how to ensure the kegerator is properly leveled for optimal performance.
A checklist to ensure the kegerator is ready for use after installation.
Guide on operating the temperature control panel to set and monitor temperature.
To Next Page
