Free-Standing Installation
A free-standing installation will allow you to install the kegerator in
almost any place you desire. Please follow the safety information
referenced on the Important Safety Information page in this manual.
Important Note:
° Please refer to the dispense
kit installation guide to
complete the full assembly of
the kegerator.
Guard Rail
The guard rail helps to hold glasses on the top of the cabinet in
order to avoid spills or broken glass. The guard rail will need the
four installation pegs to hold in place.
1. Insert the four installation pegs on the outer edges of the top
of cabinet.
2. Place the guard rail onto the four installation pegs. You may
need to push down on the guard rail to ensure the rail has
clicked into place on the pegs.
3. Screw the four small guard rail screws into the guard rail.
This will lock the rail into position.
Drip Tray
The drip tray is a reservoir to collect any runoff liquid from overfilled
glasses, leaking faucets, or spills. There are two pieces included
for this tray. Place it on top of the cabinet and position under the
faucet.
To Next Page
Loading...
