4
Electrical Shock Hazard!
Plug into a grounded 3-prong outlet.
Never remove the grounding prong from the plug.
Never use an adapter to bypass the grounding prong.
DO NOT use an extension cord.
Failure to follow these instructions can result in fire, electrical shock, or death.
Installation Clearance Requirements
To ensure proper ventilation and service access, allow at least 3” of clearance at the sides
and top of the wine refrigerator, and at least 5” of clearance at the back. Do not install this
unit in a built-in undercounter setting.
Electrical Requirements
Before you move your wine refrigerator into its final location, it is important to make sure you
have the proper electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National
Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your wine refrigerator, be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
The fuse (or circuit breaker) size should be 10-15 Amps..
To Next Page
Loading...
