14
2. Insert the Flathead screwdriver through the gasket side of the door into the decorative
plug slot. You may need to use a flashlight to help guide you through this process.
3. Carefully turn the screwdriver clockwise to remove the two preinstalled decorative plugs
from the front of the door. Reinsert the decorative plugs to the right side of the door using
this same procedure.
4. Remove the decorative plastic cap from the top left corner of the door and insert it into the
top right corner.
5. After the cap is inserted, carefully press the door gasket into its original position.
To Next Page
Loading...
