EDGETEC SYSTEMS PTY LTD Part # 9-2100 SEP2015 www.edgetec.net
Diagram 5 Activating Air Bleed
*Important - Only Activate Air Bleed if pump does not
prime (refer page 10)
PRIOR TO AUGUST 2012
TriFlo Spa Bath Pump
Congratulations on the purchase of your new TriFlo spa bath pump. The TriFlo spa bath
pump has been specifically designed for spa bath applications to ensure that you have
optimum spa jet performance and many years of trouble free operation.
The TriFlo pump internal design allows the water to self drain so that there is no residue
water left in the pump when the spa is emptied in accordance with Local Health
Regulations when installed correctly.
TriFlo spa bath pumps are designed for spa bath operation only and should not be used in
chemically treated water or any other purpose without seeking written approval from
Edgetec Systems Pty Ltd for the application.
Attach 10 mm Flexible
drain tube (Not Supplied)
Loop Tube Above Bath
Maximum Waterline
After August 2012
Twist Cap Air Bleed - Rotate
Fully Anticlockwise to Open
Attach 10 mm Flexible
drain tube (Not Supplied)
Loop Tube Above Bath
Maximum Waterline
Attach 10 mm Flexible
drain tube (Not Supplied)
Loop Tube Above Bath
Maximum Waterline
To activate air bleed,
Drill out blind hole inside
elbow (Use 4 mm drill bit)
To Next Page
Loading...
