EdgeMarc 4550 Networking Gateway Installation Guide
9
Administration
You can configure the 4550 using a web browser such as Internet Explorer or Mozilla Firefox.
The 4550 is shipped with the pre-configured IP address 192.168.1.1 for the LAN port.
To connect to the 4550, follow these steps:
1. Connect a PC with DHCP enabled to LAN port 4 of the 4550
2. Launch a web browser on the PC and enter the URL string: 192.168.1.1. Press Return
The login window appears
3. Enter the username root and the password default to log into the system
The initial 4550 main configuration menu appears
To Next Page
Loading...
Need help?
General