Do you have a question about the EDIFIER e10 and is the answer not in the manual?
Connect active and passive speakers using the speaker connecting cable.
Connect audio source to the AUX input port with a 3.5mm audio cable.
Connect power and adjust master volume to desired listening level.
Connect power adapter and use the button to turn the system on/off.
Connect audio source via AUX cable and adjust volume.
| Tweeter | Yes |
|---|---|
| Speaker type | 3-way |
| Driver diameter | 40 mm |
| Woofer diameter | 82 mm |
| Speaker position | Satellite |
| Number of drivers | 3 |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | 2.0 channels |
| Number of woofer drivers | 2 |
| Woofer diameter (imperial) | 3 \ |
| Subwoofer driver diameter (imperial) | 1.5 \ |
| Product color | Silver |
| Housing material | - |
| Recommended usage | PC |
| Frequency range | 48 - 20000 Hz |
| RMS rated power | 36 W |
| Signal-to-Noise Ratio (SNR) | 85 dB |
| Connectivity technology | Wired |
| Depth | 180 mm |
|---|---|
| Width | 105 mm |
| Height | 310 mm |
| Weight | 2400 g |
Loading...