EDIFIER MR4 User Manual

Audio inputs & Audio output
EDIFIER MR4 provides you with three different input methods, and the three inputs can be used in parallel.
Sleeve: ground
Ring:
Tip: +
1. TRS balanced input
TRS balanced input refers to a Φ6.35mm (1/4 inch) three-stage balanced port for
connecting to audio devices with 6.35mm balanced output (nominal input level:
+4dBu), such as audio interfaces, mixers, audio production devices, etc.
2. RCA unbalanced input
RCA unbalanced port is used for connecting to audio devices with unbalanced output (nominal input level: -10dBV),
such as personal music players, desktop computers, CD players, etc.
3. AUX unbalanced input
AUX port is a 3.5mm unbalanced input port used for connecting to computers, mobile phones, tablets, etc.
Note:
Please rotate the multi-function dial counterclockwise to the lowest volume level before connections.
Headphone output
Insert the headphones into the " " port on the front panel of the active speaker, then the speaker will be muted
and the headphones will output sound.
Note:
You can control the headphone volume with the multi-function dial.
Audio inputs
Audio output
-

EDIFIER MR4 Specifications

General

Product color	Black
Housing material	MDF
Recommended usage	Studio
Tweeter	Yes
Speaker type	-
Woofer diameter	1 mm
Speaker position	Front
Tweeter diameter	2.45 mm
Number of drivers	2
Speaker enclosure	Closed
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Number of tweeter drivers	1
Woofer diameter (imperial)	9.8 \
Bluetooth	No
Connectivity technology	Wired
Frequency range	60 - 20000 Hz
RMS rated power	21 W
Speakers RMS power	42 W
Signal-to-Noise Ratio (SNR)	85 dB
Total Harmonic Distortion (THD)	0.2 %
Quantity per pack	2 pc(s)