EasyManuals Logo

EDIFIER MR4 User Manual

EDIFIER MR4
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Troubleshooting
No sound
• Check if the speaker is ON.
• Try to turn up the volume using the volume control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speaker.
• Check if there is a signal output from the audio source.
The MR4 does not turn on
• Check if main power is connected, or if the wall outlet is switched on.
Noise coming from speakers
• EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug
audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no
problem with this product.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the
section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for
local contact information.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EDIFIER MR4 and is the answer not in the manual?

EDIFIER MR4 Specifications

General IconGeneral
Product colorBlack
Housing materialMDF
Recommended usageStudio
TweeterYes
Speaker type-
Woofer diameter1 mm
Speaker positionFront
Tweeter diameter2.45 mm
Number of drivers2
Speaker enclosureClosed
Speaker placementTabletop/bookshelf
Audio output channels2.0 channels
Number of tweeter drivers1
Woofer diameter (imperial)9.8 \
BluetoothNo
Connectivity technologyWired
Frequency range60 - 20000 Hz
RMS rated power21 W
Speakers RMS power42 W
Signal-to-Noise Ratio (SNR)85 dB
Total Harmonic Distortion (THD)0.2 %
Quantity per pack2 pc(s)

Related product manuals