Connectivity & Operational guide
AUX Input
Adjustment
1. Press the volume knob on the side panel or the "LINEIN"
button on the remote control to switch to PC/AUX input.
The LED indicator turns to green.
2. Play the audio on your connected device and adjust master
volume/bass/treble to a desired level.
Note:
If two audio sources are connected simultaneously, both signals will play. To dedicate audio
output from one source, decrease the volume or power off the unselected device.
volume
Power
OffOn
* This plug type is meant for illustration purpose only.
Aux In
*
English
To Next Page
Loading...
