EDIFIER R2750DB - Bluetooth Connectivity

English
Bluetooth Operation
1. Press the “ ” button on the remote control, or press the “Volume control/Input selection” dial on
the active speaker to select Bluetooth mode, LED light will turn blue.
2. Set your Bluetooth device to search for and connect to “EDIFIER R2750DB”.
3. Pin code for connection is “0000” if needed.
4. Play music on the connected device and adjust the settings to a desired level.
5. To disconnect Bluetooth, Press the “ ” button on the remote control, or press the
“Volume control/Input selection” dial on the active speaker.
Note:
1. To enjoy all Bluetooth functions of this product, please ensure your mobile device has A2DP profile.
2. Bluetooth connectivity and compatibility may be different between different source devices, depending
on the software versions of source devices.
EDIFIER R2750DB