EDIFIER TWS5 User Manual

The left and right headphones have finished TWS pairing before leaving the factory. If the wireless
connection fails to resume, please follow the steps below to re-pair:
When there is no TWS connection, separately double press the multifunctional button of the left
and right headphone to enter TWS pairing state, blue light flashing rapidly;
After pairing is done, blue lights of the left and right headphones will flash slowly
Functional Operation Instructions
Music Playback Mode
Call Mode
To clear pairing records with mobile phone: when without Bluetooth or TWS connection, press and
hold the multifunctional button for 8 seconds.
To disconnect connection with mobile phone: when the phone is connected, no music is played
and with no call, press and hold the multifunctional button for 3 seconds.
FAQs
Red light instead of blue light flashes.
The headphones are at low battery level, please recharge the
headphones.
Red light is off during charging.
• Please ensure the headphones are correctly placed into the charging case.
• When the headphones are not used for long periods of time, the battery will enter sleep state, it
needs to charge about 30 minutes and then the red light will be lit.
No sound

EDIFIER TWS5 Specifications

General

Continuous audio playback time	8 h
Impedance	16 Ω
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Auto power off	Yes
2.5 mm connector	No
Cables included	USB
Accessories included in set	3 sizes silicone eartips
Wireless range	10 m
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Product color	Black
Wearing style	In-ear
Recommended usage	Calls/Music
Protection features	Moisture resistant
International Protection (IP) code	IPX5
Microphone type	Built-in