Need help?Do you have a question about the EDIFIER W200T mini and is the answer not in the manual?
General| Headset type | Binaural |
|---|---|
| Product type | Headphones |
| Product color | Black |
| Wearing style | In-ear |
| Control unit type | On-ear control unit |
| Recommended usage | Music |
| Protection features | Dust resistant, Water resistant |
| International Protection (IP) code | IP54 |
| Bluetooth | Yes |
| Bluetooth version | 5.1 |
| Bluetooth profiles | A2DP, AVRCP, HFP |
| Connectivity technology | True Wireless Stereo (TWS) |
| Microphone type | - |
| Battery type | Built-in battery |
| Battery recharge time | 1 h |
| Continuous audio playback time | 4 h |
| Battery recharge time (charging case) | 2 h |
| Continuous audio playback time (with charging case) | 18 h |
| Quantity | 1 |
| Charging case type | Wired |
| Charging case connector type | USB Type-C |
Weight and Dimensions| Charging case weight | 30.2 g |
|---|---|
| Left earpiece weight | 4.1 g |
Earbuds automatically power on when removed from the case and power off when placed back inside.
Take out earbuds, press touch panel for 3s until LEDs blink rapidly, then select device to connect.
Disconnect earbuds, then press and hold touch panel on each earbud for 8s to reset them individually.
Tap touch panel twice to initiate left/right earbud connection. Green LED blinks twice every 5s upon successful connection.
Control music playback (play/pause, track skip) and manage calls (accept, end, reject) using touch panel gestures.
Activate your device's voice assistant by pressing and holding the touch panel for 3 seconds.
To Next Page
