EN
Power ON/OFF
Green LED lit for 1s
1. Power ON when taken out of case.
2. Press and hold the touch panel on either earbud for 3s. White and green
LED will blink rapidly.
3. Select either "EDIFIER W200T mini R" or "EDIFIER W200T mini L" in your
device setting to connect.
1st Pairing
1.
Power ON when taken out of case. White and green LED will blink rapidly.
2. Select either "EDIFIER W200T mini R" or "EDIFIER W200T mini L" in your
device setting to connect.
Note: For subsequent use, the earbuds will auto-connect to device used last
time.
Pairing
Indicator Indicator
1. Power ON when taken out of the case.
2. Power OFF when placed in the case.
3s
3s
To Next Page
Loading...
