EDIFIER W200T mini User Manual

1. Power on when taken out of the case.
2. Earbuds must disconnect to any devices.
3. Tap the touch panel 2 times until the green LED blink rapidly to enter left
& right earbuds connection.
4.
After the earbuds are connected, the green LED will blink 2 times every 5s.
5. Enter pairing mode.
1. Power ON when taken out of the case.
2. Earbuds must disconnect to any devices.
3.
Press and hold the touch panel on both earbuds respectively for 8s to reset.
Note: Left and right earbud must be done Reset separately.
Left & Right connection
Reset
8s
8s
Indicator Indicator
x2
x2

EDIFIER W200T mini Specifications

General

Headset type	Binaural
Product type	Headphones
Product color	Black
Wearing style	In-ear
Control unit type	On-ear control unit
Recommended usage	Music
Protection features	Dust resistant, Water resistant
International Protection (IP) code	IP54
Bluetooth	Yes
Bluetooth version	5.1
Bluetooth profiles	A2DP, AVRCP, HFP
Connectivity technology	True Wireless Stereo (TWS)
Microphone type	-
Battery type	Built-in battery
Battery recharge time	1 h
Continuous audio playback time	4 h
Battery recharge time (charging case)	2 h
Continuous audio playback time (with charging case)	18 h
Quantity	1
Charging case type	Wired
Charging case connector type	USB Type-C

Weight and Dimensions

Charging case weight	30.2 g
Left earpiece weight	4.1 g