EDIFIER W280NB Pro - User Manual

MFB (Multi-Function Button)
EDIFIER W280NB Pro
Bluetooth
3s
EN 1. Power ON/OFF
2. First pairing
3. Pairing for new device
7. Charging
6. Controls
Manual
4. Reset
Press and hold the power button to power on/o.
1. Once powered on, the headphones will automatically enter Bluetooth
pairing mode.
2. Select "EDIFIER W280NB Pro" from your device list to connect.
1. In ON state, press and hold the MFB button for about 3 seconds
to enter Bluetooth pairing mode.
2. Select "EDIFIER W280NB Pro" from your device list to connect.
Note: For subsequent use, the headphones will automatically connect
to the device used last time.
1. In ON state, press the "+" and "-" buttons for 5 seconds, green LED
will blink until the reset is complete.
2. Then the headphones will automatically enter Bluetooth pairing mode.
W280NB Pro
Wireless Noise Cancelling Neckband Headphones
5. Multipoint connection
1. Pair device A with the headphones successfully.
2. Press and hold the MFB button for 3 seconds to re-enter Bluetooth
pairing mode, and then select "EDIFIER W280NB Pro" in device B
settings to connect.
3. Select "EDIFIER W280NB Pro" again in device A settings to complete
the multipoint connection.
Note: For subsequent use, the headphones will automatically reconnect
to the two devices used last time.
Note:
1. Default sound control: High Noise Cancellation / Ambient Sound / Noise
Cancellation o.
2. "x 1" Press , "x 2" Double press, "—" Press and hold.
3. Download EDIFIER ConneX App to customize more control settings.
Connect the headphones to a power source via the USB-C cable for
charging.
Note: Make sure the USB-C po is completely d before charging.
Input: 5 V 500 mA
x6
5s
● Call
● Music
● Mode
1s
1s
ON
OFF
-
-
EDIFIER W280NB Pro
Bluetooth
3s
①
EDIFIER W280NB Pro
Bluetooth
A
EDIFIER W280NB Pro
Bluetooth
A
②
③
B
x2
x1
x1
x1
x2

EDIFIER W280NB Pro Specifications

General

Brand	EDIFIER
Model	W280NB Pro
Category	Wireless Headphones
Language	English