EN 1. Power ON/OFF
2. Pairing
5. Controls
1. Power ON when the case is opened.
2. Power OFF when placed in the case and the case is closed.
Note:
If there is no Bluetooth connection for 10 minutes after power on, the earbuds will
turn off automatically.
3. Reset
1. Earbuds placed in the case and keep the case open.
2. Press the button on the case 3 times to re-enter left & right connection and
clear pairing records, white LED will blink slowly.
3. Select "EDIFIER W220T" in your device setting to connect. White and green
LEDs will blink alternately, then white LED will blink once and turn off when
successfully.
4. Charge
For more information, please visit our website:
www.edifier.com
@Edifier_Global @Edifier_Global@Edifierglobal
Model: EDF200089
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information contained
herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and
illustrations shown on this manual may be slightly different from actual product.
If any difference is found, the actual product prevails.
True Wireless Earbuds Headphones
W220T
Manual
1. Earbuds placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. White and green LEDs
will blink alternately.
3. Select "EDIFIER W220T" in your device setting to connect. White LED will blink
once and then turn off when successfully.
1st Pairing
1. Earbuds placed in the case and keep the case open. White and green LEDs
will blink alternately.
2. Select "EDIFIER W220T" in your device setting to connect. White LED will
blink once and then turn off when successfull.
Note：
For subsequent use, the earbuds will automatically connect to the device used last
time.
Charging case
1. Please connect the case to power source
with the included Type-C charging cable
for charging.
2. Orange LED is steady lit when charging
and off when fully charged.
Note:
Please do not charge the earbuds when
there is sweat or other liquids inside the
charging port, which may damage the
earbuds.
Input: 5V 200mA(Earbuds)
5V 1A(Charging case)
Indicator Button
3s
Indicator Button
x3
Pinch Area Pinch Area
Note:
1. Easily pinch the debossed area of earbuds stem to select functions.
2. Images are for illustrative purposes only and may differ from the actual product.
3. Download Edifier Connect App for more customizable control settings.
x1
x1
x2
x1
x1
x2
x3x3
x1x1
2s
2s
2s
2s
Indicator
Indicator
To Next Page
Need help?
General
Weight and Dimensions
