EDIFIER X5 Pro User Manual

EN 1. Power ON/OFF
2. First Pairing
3. Pairing For New Device
5. Charging
6. Controls
Manual
For more information, please visit our website:
www.edier.com
Model: EDF200136
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2024 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
4. Reset
@Edier_Global@Edierglobal @Edier_Global
Input: 5V 200mA(Earbuds) 5V 1A(Charging case)
Note: Please do not charge the earbuds when there is sweat or other
liquids inside the charging po, which may damage the earbuds.
Note:
1. Default sound control: noise cancellation / ambient sound / noise
cancellation o.
2. Images are for illustrative purposes only and may dier from the
actual product.
Open or close the case to power on/o.
1s
1s
x3
1. Once powered on, the earbuds will automatically enter Bluetooth
pairing.
2. Select "EDIFIER X5 Pro" in your device setting to connect.
1. Place the earbuds in the case and keep it open.
2. Press and hold the button on the case for 3s until white and red
LED blink.
3. Select "EDIFIER X5 Pro" in your device setting to connect.
Note: For subsequent use, the earbuds will automatically connect to
the device used last time.
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED blinks until the
reset is complete, then the earbuds will automatically enter
Bluetooth pairing.
X5 Pro
True Wireless Earbuds with Active Noise Cancellation

EDIFIER X5 Pro Specifications

General

Driver	10mm dynamic driver
Playtime (Earbuds)	6 hours
Playtime (with Charging Case)	24 hours
Charging Time (earbuds)	1 hour
Charging Time (charging case)	2 hours
Charging Port	USB-C
IP Rating	IP55
Active Noise Cancellation (ANC)	Yes
Frequency Response	20Hz-20kHz
Battery Life (earbuds)	6 hours
Battery Life (with charging case)	24 hours
Weight (per earbud)	4.5g
Weight (charging case)	37g
Bluetooth Protocol	A2DP, AVRCP, HFP
Audio Codec	SBC
Bluetooth Version	5.3

Summary

Power ON/OFF

Case Operation

Open or close the charging case to power the earbuds on or off.

First Pairing

Automatic Bluetooth Connection

Earbuds automatically enter pairing mode upon powering on. Connect via device settings.

Pairing for New Device

Manual Pairing Procedure

Hold the case button for 3s until LEDs blink for manual pairing with a new device.

Reset

Factory Reset Instructions

Press the case button 3 times to reset earbuds. White LED blinks upon completion.

Charging

Charging Specifications and Precautions

Details input power for earbuds/case and warns against charging with moisture.

Controls

Touch Control Functions

Details touch commands for ANC, calls, volume, and playback.