- 18 -
ENGLISH
Cleaning should be carried out with the aid of a vacuum cleaner (see optional page. 23).
• Shake the cleaning bars located in the top front part, underneath the ceramic top (g. 1).
• Open the door and remove and empty the ash pan (**) (g. C).
• Remove the combustion chamber or use the spatula to scrape it and clean out any blocked holes on all sides.
• DO NOT EMPTY THE RESIDUE OUT INTO THE PELLET HOPPER.
• Remove the combustion chamber (1) and scrape with a spatula. Clean any obstructions in the apertures (g. C).
• Suction the combustion chamber holder, clean the contact edges.
• Clean the glass, if necessary (when cold).
ATTENTION !!!
• Involves cleaning the hearth (with a swab) once the ash pan has been removed (3 - g. C).
• empty the pellet hopper and clean the base with the vacuum cleaner.
• Clean with the swabs (4 - g. D), vacuum out the 3 pipes below (5 - g. E)
• Clean out the combustion chamber and smoke extractor (6 - g. E)
*
*
*
*
g. 1
g. 2
g. 3 g. 4
*
*
*
*
NOTE:
To Next Page
Loading...
