- 3 -
ENGLISH
SAFETY INFORMATION
THE BOILER-STOVE MUST NEVER BE MADE TO
OPERATE WITHOUTWATER IN THE SYSTEM NOR AT
A PRESSURE OF LESS THAN 1 BAR. IT CAN BE DA-
MAGED IF IT IS IGNITED WITH NO WATER IN THE
SYSTEM.
• The boiler-stove is designed to heat water by means of auto-
matic combustion of pellets (wood with 6 mm diameter) in the
hearth.
• The only risks that may derive from using the boilerstove
pertain to non-compliance with the installation regulations,
direct contact with live electrical parts (internal), contact with
the re or hot parts, or foreign substances being put into the
boiler-stove.
• Should components fail, the boiler-stove is equipped with
safety devices to guarantee its automatic shutdown.
• These are activated without any intervention required.
• In order to function correctly, the boiler-stove must be instal-
led in accordance with the instructions given herein.
• Whilst functioning, the door must never be opened. In fact,
combustion is fully automatic and requires no manual interven-
tion.
• Under no circumstances should any foreign substances be put
into the hearth or the hopper.
• Do not use ammable products to clean the smoke channel
(the ue section connecting the boiler-stove smoke outlet to the
chimney ue).
• Hearth and hopper components must only be cleaned with a
vacuum cleaner.
• The glass can be cleaned when COLD with a suitable product
(e.g. GlassKamin) and a cloth. Do not clean when hot.
• Ensure that the boiler-stoves are installed and ignited by a qua-
lied Edilkamin DEALER, in accordance with the
instructions given herein.
• When the boiler-stove is in operation, the exhaust pipes and
door become very hot (do not touch without wearing the thermal
glove).
• Do not place anything, which is not heat resistant near the
boiler-stove.
• NEVER use liquid fuel to ignite the boiler-stove or rekindle
the embers.
• Do not obstruct the ventilation apertures in the room
where the boiler-stove is installed, nor the air inlets of the
boiler-stove itself.
• Do not wet the boiler-stove and do not go near electrical
parts with wet hands.
• Do not use reducers on the smoke exhaust pipes.
• The boiler-stove must be installed in a room that is suitable for
re prevention and equipped with all that is required (power and
air supply and outlets) for the boiler-stove to function correctly
and safely.
• The boiler-stove must be kept in a room where the temperature
is above 0 °C.
• Use appropriate anti-freeze additives for the water of the
system.
• Ensure that the temperature of the return water is at least 45-50 °C.
ATTENTION:
The undersigned EDILKAMIN S.p.a. with head ofce headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - VAT IT00192220192
Declares under its own responsability as follows:
The wood pellet boiler-stoves specied below is in accordance with the 89/106/EEC (Construction Products)
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard:
The wood pellet boiler-stove IDROFLEXA is in compliance with the requirements of the European directives:
2006/95/EEC - Low voltage directive
2004/108/EEC - Electromagnetic compatibility directive
To Next Page
Loading...
Need help?
General