Need help?Do you have a question about the Edimax BR-6428nS V5 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Receiver sensitivity | 11g (11Mbps): -79 ±2dBm, 11g (54Mbps): ‐68±2dBm, 11n (20MHz, MCS7): ‐67±2dBm, 11n (40MHz, MCS7): ‐64±2dBm |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Transmit power | 16 dBmW |
| Antennas quantity | 2 |
| Memory card slot(s) | No |
| Ethernet LAN (RJ-45) ports | 5 |
| Output current | 0.4 A |
| Output voltage | 9 V |
| Power source type | DC |
| Product type | Tabletop router |
| Product color | Black |
| Flash memory | 2 MB |
| Certification | CE, RoHS |
| Internal memory | 8 MB |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| Firewall security | SPI Firewall, IP and MAC Address Binding, Wireless MAC Filtering |
| Security algorithms | WEP, WPA, WPA2, WPA2-PSK, WPS |
| Supported network protocols | Dynamic IP, Static IP, PPPoE, IPv4 |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package type | Box |
| Number of products included | 1 pc(s) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 107 mm |
|---|---|
| Width | 153.8 mm |
| Height | 25 mm |
| Weight | 150 g |
Lists all the items included in the product package.
Explains the function and color of each LED indicator on the device.
Details the physical ports and buttons on the rear of the device.
Provides essential safety instructions for using the device.
Guides on setting up the device to function as a Wi-Fi router.
Instructions for configuring the device in Wireless ISP mode.
Steps to set up the device as a wireless range extender.
Explains how to restore the device to its original factory settings.
Configuration options for the Wide Area Network (WAN) connection.
Basic wireless configuration including SSID, channel, and security.
Resets all device settings to their original factory defaults.
Guides on updating the device's system firmware for new features.
Explains how to ensure your computer has a dynamic IP for initial access.
Step-by-step guide to verify if your computer uses a dynamic IP.
Instructions on manually changing your computer's IP address.
Common problems and solutions for using the BR-6428nS V5.
To Next Page