Edimax BR-6675nD - Page 53

52
2. “ConnectonDemand”onlyconnectstotheInternetwhen
youinitiateInternetconnection.
3. “Manual”connectstotheInternetonlywhenthe
“Connect”buttononthispageisclicked,anddisconnects
whenthe“Disconnect”buttonisclicked.
IdleTimeOut Specifytheamountoftimetherouterwaitsbeforeshutting
downanidleconnection.Thisoptionisonlyavailablewhen
“ConnectonDemand”isselected.
EnableDual‐WAN
Access
Checkthe“EnableDual‐WANAccess” boxifyourISPrequires
youtodoso.

Click“Apply”tosavethechanges.Afteryouhaveclicked“Apply”,youwillseethe
followingmessage:



Click“Apply”tosavethechangesandrestartthebroadbandrouter.Ittakesabout60
secondsforthebroadba ndroutertorestart.Click“Continue”toconfigureothersettings.

