Need help?Do you have a question about the Edimax EN-9260TX-E and is the answer not in the manual?
General| Interface | PCI |
|---|---|
| Data Rate | 10/100/1000 Mbps |
| Connector | RJ-45 |
| Interface Type | Ethernet |
| LEDs | Link/Activity, Speed |
| Operating System Support | Windows 98/ME/2000/XP |
| Standards | IEEE 802.3, IEEE 802.3u |
| LED Indicators | Link/Activity |
| Chipset | Realtek RTL8139 |
| Cable Type | UTP/STP |
Identifies the specific model number of the Edimax Ethernet adapter.
Lists all included items such as the adapter, bracket, guides, and CD.
Explains the status and function of the adapter's LINK/ACT and 1000M LEDs.
Details the technical capabilities and standards supported by the adapter.
Lists the hardware and software prerequisites for installing the adapter.
Step-by-step instructions for physically installing the PCI Express adapter.
Guides Windows users through installing drivers using the automatic setup wizard.
Manual procedure for installing Windows drivers using the product CD-ROM.
Instructions for installing drivers on Novell and Linux operating systems from the CD.
Steps to resolve issues where the computer does not detect the new hardware.
How to fix problems with the adapter not being identified in Device Manager.
Diagnoses and resolves issues causing the adapter to operate at 100Mbps instead of 1000Mbps.
To Next Page
