Need help?Do you have a question about the Edimax ES-1008PH V2 and is the answer not in the manual?
General| Switching Capacity | 1.6Gbps |
|---|---|
| Forwarding Rate | 1.19Mpps |
| Product Type | Ethernet Switch |
| Ports | 8 x 10/100Mbps RJ45 ports |
| MAC Address Table | 1K |
| LED Indicators | Power, Link/Activity, PoE |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10-70°C |
| Humidity | 10% to 90% non-condensing |
Describes the front panel components and indicators of the switch, including ports and DIP switches.
Guides on connecting network devices using RJ-45 ports and UTP cables.
Instructions for connecting the power adapter to the device.
Addresses the issue where the power LED indicator is not lit.
Addresses the issue where the LNK/ACT LED is not lit when devices are connected.
To Next Page