Need help?Do you have a question about the Edimax ES-3305P and is the answer not in the manual?
General| MAC address table | 1000 entries |
|---|---|
| Store-and-forward | Yes |
| Maximum data transfer rate | 0.1 Gbit/s |
| Supported data transfer rates | 10, 100 Mbps |
| 10G support | No |
| Networking standards | IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 100BASE-TX, 10BASE-T |
| Switch type | Unmanaged |
| Switch layer | - |
| Power connector | DC-in jack |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Input current | 0.6 A |
| DC input voltage | 5 V |
| Power consumption (typical) | 1.07 W |
| Number of power supply units | 1 |
| Certification | CE, FCC |
| Product color | Black |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 98 mm |
|---|---|
| Width | 71 mm |
| Height | 25.5 mm |
| Weight | 92 g |
Details the ES-3305P, ES-3308P, and ES-3316P switch models.
Lists items included in the product package for user verification.
Describes the front panel layout and LEDs of the switches.
Describes LED indicators and back panel ports for the switches.
Specifies the recommended temperature and humidity for operation.
Guides on connecting network cables to the switch and devices.
Instructions on how to connect the power adapter to the switch.
Solutions for when the power LED is not lit.
Solutions for when Link/Activity LEDs do not light up.
Details FCC regulations regarding radio frequency interference.
Important FCC warnings about device operation and antenna placement.
Explains CE mark requirements and potential radio interference.
To Next Page
