EasyManuals Logo

Edimax ES-3305P Datasheet

Edimax ES-3305P
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.
5-Port Fast Ethernet Desktop Switch
ES-3305P
www.edimax.com
Description
The ES-3305P is a 10/100 Mbps unmanaged Ethernet desktop switch designed to enhance network performance.
It’s compact, sleek design offers outstanding performance and high efficiency, using store and forward packet-
switching technology to provide reliable data transfers, ideal for network connectivity in the SOHO environment.
To extend home networks or meet online gaming, multimedia transfer or streaming requirements the ES-3305P
is a cost-effective Fast Ethernet solution. The plug-and-play design ensures users can easily connect network
devices such as PCs, network-attached storage or print servers to a home network with no manual configuration
necessary.
Supports Auto-Negotiation
Each of the ES-3305P’s ports automatically detect whether connected network devices are running at 10Mbps or
100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and
hassle-free operation.
Supports Non-Blocking Wire Speed
The ES-3305P forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the ES-
3305P supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to
connected devices and allowing you to run a high speed network smoothly.
IEEE Energy Efficient Ethernet (EEE) Compliance
Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-3305P offers
environmental efficiency . To comply with the IEEE802.3az standard, the ES-3305P provides power saving
functionality to reduce energy consumption and save costs:
Inactive Link Detection
When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature
automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to
the link status and the number of active network devices.
Cable Length Detection
Devices equipped with this feature automatically detect the length of connected Ethernet cables and adjust
power usage accordingly. The shorter the cable length, the less power it consumes.
Easy to Use
The ES-3305P is plug-and-play and supports a wide range of network protocols. Installation and network
management is quick and straightforward, and clear and convenient LED indicators display easy to read port and
switch status.

Other manuals for Edimax ES-3305P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edimax ES-3305P and is the answer not in the manual?

Edimax ES-3305P Specifications

General IconGeneral
MAC address table1000 entries
Store-and-forwardYes
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10, 100 Mbps
10G supportNo
Networking standardsIEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology100BASE-TX, 10BASE-T
Switch typeUnmanaged
Switch layer-
Power connectorDC-in jack
Basic switching RJ-45 Ethernet ports quantity5
Input current0.6 A
DC input voltage5 V
Power consumption (typical)1.07 W
Number of power supply units1
CertificationCE, FCC
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth98 mm
Width71 mm
Height25.5 mm
Weight92 g

Related product manuals