7
Troubleshooting
1. Power LED is not lit
Check if the power cord is properly connected to the plug and the
power outlet; make sure the power cord is firmly plugged into the
power socket of the switch.
2. LINK/ACT LED is not lit when connected to devices
Make sure the network device attached to the switch is turned on.
Make sure the network cable is properly connected to the switch
and the network device.
Make sure the network cable is a UTP cable that complies with
EIA/TIA 568 and Category 5 specifications.
[!] Contact your dealer if problem persist.
To Next Page
Loading...
