Wireless LAN Access Point
Wireless LAN Access Point
Wireless LAN Access Point
Wireless LAN Access Point
IEEE 802.11g/b Compatible
IEEE 802.11g/b Wireless LAN Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE
802.11g/b wireless LAN, this wireless LAN access point can let your
wireless LAN client stations access both the wired and the wireless
network nodes.
WDS Bridge Mode (Repeater Mode)
The WDS (Wireless Distributed System) function lets this access point
act as an wireless LAN access point and repeater at the same time.
Users can use this feature to build up a large wireless network in a
large space like airports, hotels and schools …etc. This feature is also
useful when users want to bridge networks between buildings where it
is impossible to deploy network cable connections between these
buildings.
Station Mode (AP Client Mode)
By setting this access point into station mode and connecting to a
network device’s Ethernet port, it can let a network device that originally
only supports wired Ethernet access the wireless LAN easily without
changing any configuration.
Robust Wireless LAN Security
Except for the basic security control by using ESSID and 64/128 bit key
length WEP encryption, this access point also supports the advanced
security features, like MAC access control and hide ESSID. It provides
a total solution for you to build up a secure wireless LAN network
environment that can prevent from all kinds of hacker intrusion.
RP-SMA Detachable Antenna
This access point provides a standard RP-SMA antenna connector that
can let you apply all kinds of high gain antennas. This can help you
enlarge your wireless LAN coverage.
Web Configuration
You can configure this access point through the friendly Web user
interface with a browser.
EW-7206APg
To Next Page
Need help?
General
Weight and Dimensions
