Edimax EW-7303APn v2 - Configure Wireless Settings

5
Edimax Technology (UK) Limited | Using 2 units of EW-7303APn v2
www.edimax.co.uk
 Step 2: Configure Wireless setting> enter your SSID (wireless network name of the
1
st
EW-7303APn v2), select an unused channel number in that environment. Security
mode: select WPA2-PSK (AES), enter your wireless password/key* into Pre-Shared
key. Click Apply to finish.
*You choose your own wireless password/key, it must be in between 8-63
characters. After configuring the wireless key, the wireless connection of EW-
7303APn v2 is secured by your own wireless password/key.
Enter your wireless key*
here. This is the wireless
key you use when you
connect to your EW-
7303APn v2 wirelessly.