4
Installation for Windows PC
1. Connect one end of an Ethernet cable to the Ethernet port on your
computer. Connect the other end to an Ethernet port on the access point.
2. Plug the power adapter into the device’s 5V power port, and plug the
adapter into a wall socket. The PWR LED should light up.
3. Insert the Edimax CD into your computer’s CD drive. When the AutoPlay
screen appears, select “Run Autorun.exe”.
Note: If a popup window appears asking “Do you
want to allow the following program to make
changes to this computer”, please click “Yes” to
continue.
4. Click on “Setup Utility” in the main menu, then select “English” to continue.
5. The setup wizard will search for the access point. When it has successfully
found the device, click “Next” to continue.
To Next Page
Loading...
Need help?
General
