Need help?Do you have a question about the Edimax CAP1200 and is the answer not in the manual?
General| Modulation | - |
|---|---|
| Frequency band | 2.412 - 2.484, 5.18 - 5.24, 5.26 - 5.32, 5.5 - 5.7, 5.745 - 5.825 GHz |
| Number of users | 100 user(s) |
| Channels quantity | - channels |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az |
| Wi-Fi data rate (max) | 1300 Mbit/s |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1200 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Internal | No |
| Certification | CE / FCC |
| Product color | White |
| Ethernet LAN (RJ-45) ports | 1 |
| VPN support | IPsec, L2TP, PPTP |
| Security algorithms | 802.1x RADIUS, EAP-AKA, EAP-FAST, EAP-SIM, WEP, WPA, WPA2, WPS |
| Antenna gain level (max) | 4 dBi |
| Input current | 1 A |
| AC input voltage | 12 V |
| Operating temperature (T-T) | 0 - 40 °C |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Width | 176 mm |
|---|---|
| Height | 32 mm |
| Weight | 305.7 g |
Lists the items included in the access point package.
Describes reset procedures and essential safety precautions.
Guides on connecting the access point to network infrastructure.
Step-by-step guide for the initial configuration of the access point.
Essential configurations like IP, SSID, and admin credentials.
Configure LAN IP, LAN ports, and VLAN settings.
Configure 2.4GHz, 5GHz, WPS, RADIUS, MAC Filter, WMM.
Procedures for logging into, out of, and restarting the AP Controller.
Manage APs, groups, WLANs, and WLAN groups.
Configure AP Controller LAN IP, ports, and VLANs.
To Next Page
