Need help?Do you have a question about the Edimax CAP1750 and is the answer not in the manual?
General| Model | CAP1750 |
|---|---|
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 1750 Mbps (450 Mbps on 2.4GHz + 1300 Mbps on 5GHz) |
| Ethernet Ports | 1 x Gigabit Ethernet |
| Antenna | Internal antennas |
| Operating Modes | Access Point, WDS, Universal Repeater |
| Wireless Standard | IEEE 802.11ac |
| PoE | 802.3af |
| Mounting Options | Ceiling, Wall |
| Wireless Security | WPA, WPA2, WEP |
| SSID | Up to 8 SSIDs |
Details the procedure to reset the device to its factory default settings.
Provides essential safety instructions for the installation and use of the access point.
Guides the user through the basic steps to get the access point operational.
Explains how to configure basic settings for the access point in AP mode.
Details the steps to configure the access point to function as a wireless repeater.
Instructions on how to connect the access point to network infrastructure.
Introduces network settings configuration.
Introduces wireless settings configuration.
Details AP wireless connection in repeater mode for SSID configuration.
Details the configuration of the access point's built-in RADIUS server.
Overview of the Edimax Pro NMS system setup process.
Details logging in, out, and restarting the AP Controller.
Introduces NMS settings for managing the AP array.
Manages access points and groups, allowing editing and adding.
Security feature to prevent unauthorized users by controlling access via MAC address.
Allows updating the access point's system firmware.
Configures the NMS system login name and password.
Configures AP Controller's IP address and DHCP server settings.
Configures the access point's 2.4GHz wireless network settings.
Configures the access point's 5GHz wireless network settings.
Provides security options for wireless data encryption for the 5GHz network.
Configures RADIUS server settings, including internal and external servers.
Configures RADIUS server settings for 2.4GHz and 5GHz.
Security feature to prevent unauthorized users by filtering MAC addresses.
Sets the operation mode for the access point (AP, Controller, Managed, Repeater).
Introduces management functions for the AP Controller.
Manages administrator login credentials and security settings.
Allows updating the access point's system firmware.
Enables saving and restoring access point settings.
Resets the access point to its factory default settings.
To Next Page
