Edimax Pro NMS
204
IV-7. Local Settings
IV-7-1. Operation Mode
Set the operation mode of the access point. AP mode is a standalone access
point, AP controller mode acts as the designated master of the AP array, and
Managed AP mode acts as a slave AP within the AP array. Repeater mode acts
as a wireless repeater.
IV-7-2. System Settings
IV-7-2-1. System Information
The “System Information” page displays basic system information about the
access point.
Displays the model number of the access
point.
Displays the product name for reference,
which consists of “AP” plus the MAC address.
Displays the total time since the device was
turned on.