Edimax Pro NMS
218
password” box and enter the password in
the field underneath.
IV-7-4-4. Factory Default
If the access point malfunctions or is not responding, then it is recommended
that you reboot the device (see IV-7-4-5.) or reset the device back to its
factory default settings. You can reset the access point back to its default
settings using this feature if the location of the access point is not convenient
to access the reset button.
Click “Factory Default” to restore settings to
the factory default. A pop-up window will
appear and ask you to confirm.
After resetting to factory defaults, please wait for the access
point to reset and restart.
IV-7-4-5. Reboot
If the access point malfunctions or is not responding, then it is recommended
that you reboot the device or reset the access point back to its factory default
settings (see IV-7-4-4). You can reboot the access point remotely using this
feature.
Click “Reboot” to reboot the device. A
countdown will indicate the progress of the
reboot.
To Next Page
Loading...
Need help?
General
