Edimax CAP1750 User Manual

Edimax Pro NMS
173
IP Address
Specify the IP address to assign the device.
Add
Click to assign the IP address to the device.
IV-6-1-2. LAN Port Settings
The “LAN Port” page allows you to configure the settings for your AP
Controllers wired LAN (Ethernet) ports.
Wired LAN Port
Identifies LAN port. USB is the LAN port
attached via mini USB adapter.
Speed & Duplex
Select a speed & duplex type for specified LAN
port, or use the “Auto” value. LAN ports can
operate up to 1000Mbps and full-duplex
enables simultaneous data packets
transfer/receive.
Flow Control
Enable/disable flow control. Flow control can
pause new session request until current data
processing is complete, in order to avoid
device overloads under heavy traffic.
802.3az
Enable/disable 802.3az. 802.3az is an Energy
Efficient Ethernet feature which disables
unused interfaces to reduce power usage.

Edimax CAP1750 Specifications

General

Brand	Edimax
Model	CAP1750
Category	Wireless Access Point
Language	English