Edimax CAP1750 User Manual

Edimax Pro NMS
191
IV-6-3-4. WDS
Wireless Distribution System (WDS) can bridge/repeat access points together
in an extended network. WDS settings can be configured as shown below.
When using WDS, configure the IP address of each access point to
be in the same subnet and ensure there is only one active DHCP
server among connected access points, preferably on the WAN
side.
WDS must be configured on each access point, using correct MAC addresses.
All access points should use the same wireless channel and encryption
method.
5GHz WDS Mode
WDS Functionality
Select “WDS with AP” to use WDS with access
point or “WDS Dedicated Mode” to use WDS
and also block communication with regular
wireless clients. When WDS is used, each
access point should be configured with
corresponding MAC addresses, wireless
channel and wireless encryption method.
Local MAC Address
Displays the MAC address of your access point.
WDS Peer Settings

Edimax CAP1750 Specifications

General

Brand	Edimax
Model	CAP1750
Category	Wireless Access Point
Language	English