Edimax CAP1750 User Manual

Edimax Pro NMS
211
Simple Network Management Protocol. SNMPv1, v2 & v3 protocol supported.
SNMPv2 can be used with community based authentication. SNMPv3 uses
user-based security model (USM) architecture.
IV-7-3-2. Date and Time
You can configure the time zone settings of your access point here. The date
and time of the device can be configured manually or can be synchronized
with a time server.
Date and Time Settings
Local Time
Set the access point’s date and time manually
using the drop down menus.
Acquire Current
Time from your PC
Click “Acquire Current Time from Your PC” to
enter the required values automatically
according to your computer’s current time and
date.
NTP Time Server
Use NTP
The access point also supports NTP (Network
Time Protocol) for automatic time and date
setup.
Server Name
Enter the host name or IP address of the time
server if you wish.
Update Interval
Specify a frequency (in hours) for the access
point to update/synchronize with the NTP
server.

Edimax CAP1750 Specifications

General

Brand	Edimax
Model	CAP1750
Category	Wireless Access Point
Language	English