71
IV-3-7. MAC Filter
Mac filtering is a security feature that can
help to prevent unauthorized users from
connecting to your access point.
This function allows you to define a list of network devices permitted to
connect to the access point. Devices are each identified by their unique MAC
address. If a device which is not on the list of permitted MAC addresses
attempts to connect to the access point, it will be denied.
To enable MAC filtering, go to “Wireless Settings”
“2.4G
Hz 11bgn”
“Security”
“Additional Authentication” and select
“MAC Filter” (see IV-3-1-3).
The MAC address filtering table is displayed below:
Enter a MAC address of computer or network
device manually e.g. ‘aa-bb-cc-dd-ee-ff’ or
enter multiple MAC addresses separated with
To Next Page
Loading...
Need help?
General
