Edimax CAP1750 - Reset

4
I-4. LED Status
LED Color
LED Status
Description
Blue
On
The access point is on.
Long Flashing
Upgrading firmware.
Short Flashing
Resetting to factory defaults.
Amber
On
Starting up.
Flashing
Error.
Off
Off
The access point is off.
I-5. Reset
If you experience problems with your access point, you can reset the device
back to its factory settings. This resets all settings back to default.
1. Press and hold the reset button on the access point for at least 10
seconds.
You may need to use a pin or similar sharp object to push the
reset button.
2. Wait for the access point to restart. The access point is ready for setup
when the LED is blue.