Need help?Do you have a question about the Edimax CAP1300 and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz, 5 GHz |
|---|---|
| Maximum Data Rate | 1300 Mbps |
| Wireless Speed (5 GHz) | 867 Mbps |
| Wireless Speed (2.4 GHz) | 400 Mbps |
| Wireless Standard | IEEE 802.11ac |
| PoE | 802.3af |
| Operating Mode | Access Point |
| Security | WEP, WPA, WPA2 |
| SSID | Up to 8 SSIDs |
| Antenna | Internal |
Device functions as a regular access point. Default mode.
Extends wireless signal from a router or access point.
Acts as a slave AP within an AP array, controlled by a master.
Acts as the master of an AP array, controlling linked access points.
Device acts as a client bridge, providing wireless signal via Ethernet.
Instructions on how to reset the device to factory defaults.
Important safety instructions for using the device.
Connects the access point to a router or PoE switch.
Guide to setting up the device in AP Mode.
Steps to configure the device as a Repeater.
Configures the access point's IP address on the LAN.
Sets up SSIDs and security for wireless networks.
Sets the administrator name and password for access.
Manages wireless settings including SSID, Security, WDS.
Sets the access point's operating mode (AP, Repeater, etc.).
Manages managed APs and their status within the array.
To Next Page
