Edimax CAP1300 - Local Settings; X-7-1 Operation Mode

Edimax Pro NMS
276
X-7 Local Settings
X-7-1 Operation Mode
The access point can function in five different modes. Set the operation mode
of the access point here.
1. AP Mode: The device acts as a standalone access point
2. Repeater Mode: The device acts as a wireless repeater (also called wireless
range extender) that takes an existing signal from a wireless router or
wireless access point and rebroadcasts it to create a second network.
3. AP controller Mode: The device acts as the designated master of the AP
array
4. Managed AP Mode: The device acts as a slave AP within the AP array.
5. Client Bridge Mode: The device is now a client bridge. The client bridge
receives wireless signal and provides it to devices connected to the bridge
(via Ethernet cable).