Edimax CAP1300 - Resetting the Device

11
I-4 LED Status
LED Color
LED Status
Description
Blue
On
The device is on.
Flashing Slowly
Upgrading firmware.
Flashing Quickly
Resetting to factory defaults.
Amber
On
Starting up.
Flashing
Error.
Off
Off
The device is off.
I-5 Reset
If you experience problems with your device, you can reset it back to its
factory settings. This resets all settings back to default.
1. Press and hold the reset button on the device for at least 10 seconds then
release the button.
You may need to use a pin or similar sharp object to push the reset
button.
2. Wait for the device to restart. The device is ready for setup when the LED
is blue.